• Productimage for EBC 70 E
  • Productimage for EBC 70 E
  • Productimage for EBC 70 E
  • Productimage for EBC 70 E
  • Productimage for EBC 70 E
  • Productimage for EBC 70 E
Brandimage to Product EBC 70 E

Electronic battery charger/maintainer

EBC 70 E

for batteries with a charging voltage of 6 or 12 volts

49,90 EUR excl. Tax / pc(s).
59,88 EUR incl. 20% Tax / pc(s).
Promotional price *
39,90 EUR excl. Tax / pc(s).
47,88 EUR incl. 20% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2025 in Germany.

Art.-No. 6851000

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Battery-saving charging through charging phases automatically matched to the battery condition
    • Charging and conservation take place according to special characteristic curves matched to the battery type
    • Optimal charging of the battery even at temperatures below 0 °C with special winter mode, device charges with higher charging current and increased charging voltage
    • Memory Saver function: In back-up charge mode, use as a power supply unit to retain the settings of the vehicle electronics when the battery is removed
    • IP65: device is dustproof and has protection against water jets from any angle
    • Different battery types can be selected via the MODE function

     

    • Charging and conservation take place according to special characteristic curves adapted to the battery type
    • Optimal charging even at temperatures below 0 °C with special winter mode
    • IP65: dustproof and protection against water jets from any angle
    • In back-up charging mode, use as a power supply unit to maintain the settings of the vehicle electrics when the battery is removed

     

    Performance70 W
    Charging voltage6 / 12 V
    Charging current2 / 4 A
    Charging capacity4 – 120 Ah
    Maintenance capacity4 – 120 Ah
    Charge cycles10
    Start voltage3 V
    Number of operating modes1
    Degree of protectionIP 65
    VPE1
    Application scope
    Suitable for battery typesWet, Gel, AGM, Lithium (LiFePO4)
    Charging applicationsKrad, cars, minibus, vans, trucks<7,5t, boats
    Chargingelectronic
    Receiving
    Backup charging operation (memory saver)
    Dimensions and weights
    Charging cable length1.1 + 0.4 m
    Connecting cable length1,5 m
    Length approx.193 mm
    Width/depth approx.85.4 mm
    Height approx.52 mm
    Weight approx.0.5 kg
    Electrical Data
    Fuse protection3.15 A
    Supply voltage230 V
    Mains frequency50 Hz
    Unit: pc(s).
    Packaging unit: 1

    • Charging cable 0.4 m with quick connector and fully insulated terminals
    • Cable 0.4 m with quick connector and ring eyelet terminals

     

    Winter mode
    Digital displayBattery voltage, battery status, reverse polarity/short circuit, back-up charge mode on/off, battery type selection.
    Reverse polarity short circuit protection
    Thermal protection switch with auto-reset
    Overload protection
    Voltage peak protection
    Charging cable +/- with standard crocodile clips0.4 m
    Charging cable +/- with M6 eye clamps0.4 m
    Connecting cable230 Volt with Schuko plug
    Stürmer Maschinen GmbH
    Dr.-Robert-Pfleger-Str. 26
    96103 Hallstadt
    Deutschland / Germany
    info@stuermer-maschinen.de

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.