• DE
  • EN
    • KontaktImprintGuarantee conditionsPrivacy policyTerms and conditions
    1. Aircraft.at
    2. Products
    3. Metalworking
    4. CNC milling machines
    5. OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    • Productimage for OPTImill FP 1530
    Brandimage to Product OPTImill FP 1530

    CNC milling machine

    OPTImill FP 1530

    187.900,00 EUR excl. Tax / pc(s).
    225.480,00 EUR incl. 20% Tax / pc(s).

    Prices are recommended retail prices. Retailer prices may vary.

    Sicherheitsdatenblatt 2

    Safetydatasheet 2

    Art.-No. 3511660

    Are you interested in this product?
  • Put a request
  • Find Trader

    • Productdetails

    • Perfect structures and robust design guarantee maximum rigidity and stability
    • All main components - machine bed, worktable, machine stand, crossbeam, saddle and headstock are made of high-quality MEEHANITE® cast iron
    • Generously dimensioned guideways in the X, Y and Z axes
    • All guideways are hardened and ground (HRC50 - HRC55)
    • The X- and Y-axes are equipped with linear roller guides so that the axes move with maximum precision even at high speeds
    • Maximum machining accuracy and high damping thanks to wide, adjustable flat guides on the Z-axis for high drilling and milling performance with high spindle output torque
    • Hardened and precision-ground ball screws mounted in high-precision bearings in all three axes for high rapid traverse speeds
    • Cooling of the main spindle gearbox (gears, bearings, spindle) through oil circulation system. Reduction of thermal expansion
    • Operating status display (end of work light)
    • Axis covers
    • LED work lamp with alarm indicator
    • Chip conveyor belt design with chip trolley
    • Energy chain with tension load and cable separation
    • Spindle oil cooler
    • Heat exchanger
    • BT50 spindle holder with a maximum spindle speed of 6,000 min-1 for high precision
    • Pneumatic weight compensation of the Z-axis ensures very high reliability and stability while several axes are working simultaneously. The SCBS system requires no additional power supply or drive. This balance system achieves high speed and high machining precision
    • Complete machine enclosure with wide-opening doors for ergonomic workpiece handling
    • Automatic lubrication system with pressure control system
    • Separation system for lubricating oil and coolant Set-up elements

    Equipment options

    Tool changer

    • Changer driven by precision cam for fast and accurate tool positioning
    • The tools are transferred directly from the tool magazine to the spindle during the tool change by means of a double gripper
    • The tools are selected bidirectionally via the shortest route.
    • The tool magazine is located outside the working area
    • The cover on the tool magazine protects the tools from chips or coolant

    Z-axis 800 mm

    Spindle

    • Rigid spindle head
    • Automatic compensation system (SCBS) on the spindle head

    Y-axis 1650 mm

    Column and cross beam

    • made from one piece

    Base body

    • Heavy-duty design and heavily ribbed construction
    • Solid one-piece box construction for maximum stability when loading very large workpieces

    X-axis 2600 mm or 3100 mm

    Working area

    • Extra wide work area


    SINUMERIK 828D
    High-tech for the compact class

    The use of two independent tools makes 4-axis turning - balance cutting - possible. The new functions include multi-channel capability with ShopTurn, which allows, among other things, the synchronization of programs with programSYNC. The new software offers the option of running two channels simultaneously in turning and grinding machines.
    SINUMERIK CNC controlSinumerik 828D Basic sets standards in all aspects of machining performance. Whether accuracy and speed, reduction of cycle times or energy efficiency and safety - SINUMERIK sets the pace.

    Communicative

    • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card

    16 function keys

    • The 8 horizontal and 8 vertical softkeys allow you to access all operating screens with just a few keystrokes

    User-friendly

    • Full QWERTY keyboard
    • Hard keys with protective film
    • IP65 protection class

    Functional safety also protects against high costs!
    Machine and system safety is not only important because strict regulations must be observed. When everything runs safely, you benefit from time savings in engineering, higher system availability and greater investment security.

    Control system

    • 10.4" color display
    • 4:3 format
    • User-friendly SINUMERIK
    • Operate software

    System software

    • SW 26X5
    • MB CNC memory2
    • ms block change time100
    • Look Ahead256
    • tools

    Complete package

    • Safety Integrated
    • Residual material detection and machining
    • ShopMill work step programming
    • Manage network drive
    • 3-D simulation
    • Co-drawing

    Additional package Siemens OSS PLUS

    • 12 months; article no. 3589020
    • 24 months; article no. 3589021
    • 36 months; article no. 3589022

    Information on this additional package and conditions for use can be found at: Material Defects Liability and On-Site Service - SiePortal - Siemens WW

     

    Data sheets
    Sicherheitsdatenblatt 2
    Safetydatasheet 2
    Cooling lubricant system
    Number of coolant pumps1 Pc.
    Coolant pump(s) drive power1.35 kW
    Dimensions and weights
    Length approx.8800 mm
    Width/depth approx.5800 mm
    Height approx.5000 mm
    Weight approx.26000 kg
    Electrical connections
    Total rated value60 kVA
    Electrical Data
    Supply voltage400 V
    Mains frequency50 Hz
    Fast motion speed
    X axis16 m/min
    Y axis10 m/min
    Z axis10 m/min
    Feed motor torque
    X axis continuous operation S180 Nm
    Y axis continuous operation S180 Nm
    Z axis continuous operation S181 Nm
    Milling table horizontal
    Table length3000 mm
    Table width1500 mm
    Min. clearance vertical spindle - milling table160 mm
    Max. clearance vertical spindle - milling table960 mm
    T-groove size22 mm
    T-groove number9
    T-groove spacing160 mm
    Max. load bearing capacity7000 kg
    Distance between columns1650 mm
    Precision
    Repetition accuracy± 0.015 mm
    Positioning accuracy± 0.009 mm
    Travel
    X axis automatic3100 mm
    Y axis automatic1650 mm
    Z axis automatic800 mm
    Min. distance spindle to column460 mm
    Max. distance spindle to column460 mm
    Turret
    DesignDouble arm gripper
    Number of tool slots24
    Max. tool diameter adjacent slots free220 mm
    Max. tool diameter110 mm
    Max. tool length300 mm
    Max. tool weight18 kg
    Tool change time tool to tool (T to T)4.5 s
    Vertical spindle
    Spindle chuckBT 50
    Speed range6000 min¯¹
    Drive motor output continuous operation S117 kW
    Drive motor output S6-30 % operation32.3 kW
    Torque drive motor continuous operation S1162 Nm
    Torque drive motor S6-30 % operation330 Nm
    VPE1
    Unit: pc(s).
    Packaging unit: 1

     

     

     

    Optimum Maschinen Germany GmbH
    Dr.-Robert-Pfleger-Str. 26
    Deutschland / Germany
    96103 Hallstadt
    info@optimum-maschinen.de

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.