OPTIturn S 500MY

• Heavy-duty design
• Compact design
• Renishaw measuring arm for manual tool measurement
• Encoder on main spindle for increased accuracy
• The entire bed design has many reinforcing ribs optimized by finite element analysis, ensuring high rigidity, better heat dissipation (thermal symmetry) and more accurate machining
• Ball screw with improved accuracy, rigidity and heat resistance.
• .Siemens servo motors in all axes
• All servo motors with integrated encoder for maximum accuracy
• The motor is located on the side of the machine and prevents heat transfer and vibrations caused by the motor
• Inclined bed design 30° for particularly large machining diameters
• Better unhindered chip flow into the chip tray
• Hydraulic three-jaw lathe chuck Ø 250 mm with soft jaws
• BMT55 tool changer with 12 tool positions and driven tools
• Hardened and precision-ground ball screws for high rapid traverse speeds in all axes Linear guide, except Y-axis which has box guide
• Device for manual tool measurement
• Tailstock with hydraulic quill
• Heat exchanger
• Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs
• Belt-type chip conveyor ensures efficient chip removal
• Work light for complete illumination of the work area
• Coolant device with cleaning gun
• RJ45 , power interface
• EMC (electromagnetic compatibility)
• Additional package SIEMENS material defect liability and free online/on-site service OSS Plus
• 1 year maintenance contract Basic included in D/A/CH

SINUMERIK 828D
High-tech for the compact class

The use of two independent tools makes 4-axis turning - balance cutting - possible. The new functions include multi-channel capability with ShopTurn, which allows, among other things, the synchronization of programs with programSYNC. The new software offers the option of running two channels simultaneously in turning and grinding machines.
SINUMERIK CNC control Sinumerik 828D Basic sets standards in all aspects of machining performance. Whether accuracy and speed, reduction of cycle times or energy efficiency and safety - SINUMERIK sets the pace.

Communicative

• Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card

16 function keys

• The 8 horizontal and 8 vertical softkeys allow you to access all operating screens with just a few keystrokes

User-friendly

• Full QWERTY keyboard
• Hard keys with protective film
• IP65 protection class

SAFETY Integrated - set up with the door open

• Functional safety also protects against high costs!
  Machine and system safety is not only important because strict regulations must be observed. When everything runs safely, you benefit from time savings in engineering, higher system availability and greater investment security.

PPU 270 control unit

• 10.4" color display
• 4:3 format
• User-friendly SINUMERIK Operate software

System software

• PPU 271 SW 24
• 3 MB CNC memory
• 3 ms block change time
• 50 Look Ahead
• 128 tools

Complete package

• Safety Integrated
• Residual material detection and machining
• ShopMill work step programming
• Manage network drive
• 3-D simulation
• Co-drawing

Additional package SIEMENS OSS Plus

• 12 months; article no. 3589020
• 24 months; article no. 3589021
• 36 months; article no. 3589022

Information on this additional package and conditions for claiming under: Material Defects Liability and On-Site Service - SiePortal - Siemens WW

• Axial tool holder driven tools
• Radial tool holder driven tools
• 3 tool holders for drilling tools
• 4 OD tool holders
• Tool holder for end faces
• Collet E2 Ø 20mm
• Collet E2 Ø 25mm
• Collet E2 Ø 32 mm